With Apple's LiDAR sensor, 3D scanning can be as easy as taking a video. The video below will outline our recommended scanning methods to help you get the best results each time. For additional videos and tips, visit scanning best practices.
LiDAR iPad and iPhone
- Start in a corner of the room with a lot of details (book shelf, picture frames, patterns)
- Stand 5-10ft away, aim the iPad at the detailed corner and tap Scan to start (scanning with the device "sideways" in landscape orientation works best). Tip: Standing back can help Twindo keep better track of your position in the room.
- Move the iPad slowly up (or down) to the ceiling. You do not need to scan the entire ceiling or the entire floor.
- Take 1-2 steps to either side, and scan back down (or up) the wall to the floor
- As if you are spraying paint on the wall, continue with this pattern moving in one single direction
- Scan the perimeter walls until you are back at your starting point
- Tap Done to complete the scan
Tips for best results:
- Avoid moving or pivoting without continuing the "fence painting" pattern
- Only scan up to one floor at a time, do not go up or down stairs
- Try not to capture anything more than once in a single scan
- In tight spaces like halls or stairways, try using the "J" scanning pattern shown in our scanning best practices